Allied Telesyn International CentreCOM 210TS Twisted Pair Transceiver / MAU

Description

ATI / Allied Telesyn International CentreCOM 210TS Twisted Pair Transceiver / MAU | AT-210TS | USED
After years of repairing, tinkering, testing, proof-of-concepts, presentations, & DIY / hobbyist  projects, the time has come to downscale and part with some of the equipment that is no longer  needed.
** USED ITEM **
Item is used, but tested -- see pictures.
Item comes
**AS PICTURED**
and does
NOT
include:
Original Packaging
Cables
Software CDs or Driver Discs
Documentation / Paperwork
Any Type of Follow-Up Support
The Micro Ethernet Transceiver Series of products are direct attach IEEE 802.3 and Ethernet Version 1.0 & 2.0  devices.
ATI supports all common Ethernet media with Micro Transceivers for thin coax (10BASE2), UTP (10BASE-T) and FOIRL LAN  systems.
The transceiver supports a single AUI that attaches directly to the AUI 15 pin connection found on most Ethernet  stations (DTEs).
Direct AUI connection reduces cabling costs.
All ATI transceivers are equipped with LEDs, providing status and diagnostic information.
LEDs make LAN installation and troubleshooting easy for the installer.
And easily accessible, user selectable SQE Test switch [ heartbeat ] is also provided on all models.
Installation ->
The AT-210TS connects directly to a DTE or workstation AUI connector.
The AT-210TS, the slim-line version, includes a connector extension for tight installations.
Plug the transceiver into the 15 pin AUI connection or the DTE and slide the connector latch into place.
Power on the DTE and verify that the power indicator is list.
Check to ensure the SQE Test setting is appropriate for equipment.
Plug a UTP ccable into the RJ45 receptacle located on the AT-210TS transceiver.
Check the Link LED to ensure equipment on the other end of link is operational.
Stations will communicate if both local and remote transceivers link LEDs are on.
Four LEDs provide Link, SQE status, Polarity and Power information.
If another 10BASE-T MAU is at the opposite end of the line, the UTP cabling must be crossed, i.e. TD+ and TD-
Testing ->
Placed the MAU's SQE Test switch to heartbeat mode and attached to an old Cisco 2500 router that had an AUI port.
Connected a diagnostic device to the MAU's ethernet port to generate traffic.
All lights on Transceiver illuminated and routher's AUI LED port indicator confirmed test traffic.
Picture 1 shows:
Top of Transceiver
Picture 2 shows:
Bottom of Transceiver
Picture 3 shows:
Front of Transceiver [ AUI Male Connector ]
Picture 4 shows:
Back of Transceiver [ RJ-45 Female Ethernet Port ]
Picture 5 shows:
Side of Transceiver [ SQE Test Switch / Toggle ]
Picture 6 shows:
Top Down Side Angle View of Transceiver
Picture 7 shows:
Transceiver In Action -> Connected to Cisco Switch via AUI port & Diagnostic via Ethernet | All LEDs Active &  Functioning Properly
Miscellaneous
Information
Non-professionally taken pictures are of the actual item being shipped.
Return Policy
This item is being sold
*AS IS*
and as pictured.
** NO RETURNS ACCEPTED ON THIS ITEM **
Make certain this is an item you can make use of before bidding.
Payment Method
Any eBay Managed Payment Method
Packaging
Item ships boxed in a 11 x 14 Padded Envelope
Item has a shipping weight of approximately 6 OZ
Shipping Method
USPS or FedEx Preferred : Most economic and trackable option
Contact seller prior to bidding to discuss  alternate shipping methods.
Item will
USUALLY
ship within one business day after payment is received;
GUARANTEED
to ship within three business days after payment is  received
Our other items ->
Browse Now!
Add us as a Favorite Seller.
We try to add a variety
of new items every week
Click Here to Add  Us to your Favorites!