-40%
CISCO A9K-MPA-1X200GE ASR9000 1-Port 200GE Modular Port Adapter

CISCO A9K-MPA-1X200GE ASR9000 1-Port 200GE Modular Port Adapter

$ 15576

Availability: 77 in stock
  • Brand: GE
  • Condition: Item is tested and it is in great condtion

    Description

    CISCO A9K-MPA-1X200GE
    Item for auction is a Cisco
    A9K-MPA-1X200GE
    Item is tested and it is in great working and physical condition
    This is your opportunity to buy this device for a fraction of its true value
    SEE TEST RESULT
    RP/0/RSP1/CPU0:ios#show invent | include PID Wed Feb 17 11:09:46.531 UTC PID: A9K-RSP880-LT-TR, VID: V02, SN: FOC2331N5FT PID: A9K-MOD200-TR, VID: V06, SN: FOC2223NTX9 PID: A9K-MPA-1X200GE, VID: V00, SN: FOC2314NBTX RP/0/RSP1/CPU0:ios# RP/0/RSP1/CPU0:ios#sh ver br Wed Feb 17 11:09:49.115 UTC Cisco IOS XR Software, Version 6.6.3[Default] Copyright (c) 2019 by Cisco Systems, Inc. ROM: System Bootstrap, Version 17.36(c) 1994-2019 by Cisco Systems, Inc. ios uptime is 16 minutes System image file is "disk0:asr9k-os-mbi-6.6.3/0x100305/mbiasr9k-rsp3.vm" cisco ASR9K Series (Pentium Celeron Stepping 3) processor with 16777216K bytes of memory. Pentium Celeron Stepping 3 processor at 2404MHz, Revision 2.174 ASR 9904 2 Line Card Slot Chassis with V2 AC PEM 2 Management Ethernet 1 FastEthernet 2 HundredGigE 2 DWDM controller(s) 375k bytes of non-volatile configuration memory. 5631M bytes of hard disk. 100027376k bytes of disk0: (Sector size 512 bytes). 100027376k bytes of disk1: (Sector size 512 bytes). RP/0/RSP1/CPU0:ios# RP/0/RSP1/CPU0:ios#sh plat Wed Feb 17 11:09:49.189 UTC Node Type State Config State ----------------------------------------------------------------------------- 0/RSP1/CPU0 A9K-RSP880-LT-TR(Active) IOS XR RUN PWR,NSHUT,MON 0/0/CPU0 A9K-MOD200-TR IOS XR RUN PWR,NSHUT,MON 0/0/0 A9K-MPA-1X200GE OK PWR,NSHUT,MON RP/0/RSP1/CPU0:ios# RP/0/RSP1/CPU0:ios#sh diag Wed Feb 17 11:09:49.326 UTC NODE module 0/RSP1/CPU0 ASR 9K Route Switch Processor for Transport MAIN: board type 0x10031a S/N: FOC2331N5FT Top Assy. Number: 68-6077-03 PID: A9K-RSP880-LT-TR HwRev (UDI_VID): V02 Chip HwRev: V1.0 New Deviation Number: -113 CLEI: IP3CADCCAB Board State : IOS XR RUN PLD: Motherboard: N/A, Processor version: 0x0 (rev: 2.174), Power: N/A MONLIB: ROMMON: Version 17.36 [ASR9K x86 ROMMON], Board FPGA/CPLD/ASIC Hardware Revision: FabSwitch0 : V1.2 FabSwitch1 : V1.2 TORNADO_VOQ : V0.1 TORNADO_ARB : V0.1 IPU : V0.20 ClkCtrl : V0.4 CpuCtrl : V0.5 DeviceCtrl : V0.0 HD0 : V2.17 HD1 : V2.17 USB0 : V2.17 DTI : V4.9 LIU : V0.0 MLANSwitch : V0.0 EOBCSwitch : V0.0 CBC (active partition) : v50.2 CBC (inactive partition) : v50.2 NODE module 0/0/CPU0 200G Modular Linecard, Packet Transport Optimized MAIN: board type 0x3d0293 S/N: FOC2223NTX9 Top Assy. Number: 68-4920-09 PCA: 73-19251-01 PID: A9K-MOD200-TR HwRev (UDI_VID): V06 Chip HwRev: V1.0 New Deviation Number: 0 CLEI: IP9IAWECAF Board State : IOS XR RUN PLD: Motherboard: N/A, Processor version: 0x0 (rev: 2.174), Power: N/A ROMMON: Version 8.49 [ASR9K x86 ROMMON], Board FPGA/CPLD/ASIC Hardware Revision: NP0 : V92.33 FIA0 : V0.3 FabSwitch : V1.2 FabArbiter : V0.1 IPU : V0.21 DBCtrl : V1.27 EOBCSwitch : V5.0 Daughter board : V1.0 CBC (active partition) : v39.9 CBC (inactive partition) : v39.7 MPA 0/0/0 : ASR 9000 1-port 200-Gigabit Ethernet Modular Port Adapter MAIN: board type 0244 68-6966-01 rev 06 dev N/A S/N FOC2314NBTX PCA: 73-19759-02 rev N/A PID: A9K-MPA-1X200GE VID: V00 CLEI: INUIAF5EAA Board State : OK FPD Software Revision: RP/0/RSP1/CPU0:ios# RP/0/RSP1/CPU0:ios#sh plat sum loc all Wed Feb 17 11:09:50.523 UTC ------------------------------------------------------------------------------- Platform Node : 0/RSP1/CPU0 (slot 2) PID : A9K-RSP880-LT-TR Card Type : ASR 9000 Route Switch Processor 880-Lite for Packet Trans VID/SN : V02 / FOC2331N5FT Oper State : IOS XR RUN Last Reset : User Initiated reload Process: reload : Tue Feb 9 12:22:18 2021 UTC Configuration : Power is enabled Bootup enabled. Monitoring enabled Rommon Ver : Version 17.36 IOS SW Ver : 6.6.3 Main Power : Power state Enabled. Estimate power 295 Watts of power required. Faults : N/A ------------------------------------------------------------------------------- Platform Node : 0/0/CPU0 (slot 0) PID : A9K-MOD200-TR Card Type : 200G Modular Linecard, Packet Transport Optimized VID/SN : V06 / FOC2223NTX9 Oper State : IOS XR RUN Last Reset : MBI-HELLO reloading node on receiving reload notification Process: mbi-hello : Wed Jan 20 07:24:38 2021 UTC Configuration : Power is enabled Bootup enabled. Monitoring enabled Rommon Ver : Version 8.49 IOS SW Ver : 6.6.3 Main Power : Power state Enabled. Estimate power 480 Watts of power required. Faults : N/A ------------------------------------------------------------------------------- Platform Node : 0/0/0 (slot 0, bay 0) PID : A9K-MPA-1X200GE Card Type : ASR 9000 1-port 200-Gigabit Ethernet Modular Port Adapter VID/SN : V00 / FOC2314NBTX Oper State : OK Last Reset : Wed Feb 17 10:59:22 2021 Up Time : 00:10:30 Configuration : Power is enabled Bootup enabled Monitoring enabled FPD SW Rev(s) : ------------------------------------------------------------------------------- RP/0/RSP1/CPU0:ios# RP/0/RSP1/CPU0:ios#admin Wed Feb 17 11:09:55.964 UTC RP/0/RSP1/CPU0:ios(admin)# RP/0/RSP1/CPU0:ios(admin)#sh diagnostic result location 0/0/CPU0 Wed Feb 17 11:09:56.023 UTC Current bootup diagnostic level for A9K-MOD200-TR 0/0/CPU0: bypass A9K-MOD200-TR 0/0/CPU0: Overall diagnostic result: PASS Diagnostic level at card bootup: bypass Test results: (. = Pass, F = Fail, U = Untested) 1 ) CPUCtrlScratchRegister ----------> . 2 ) DBCtrlScratchRegister -----------> . 3 ) PortCtrlMPA0ScratchRegister -----> . 4 ) PortCtrlMPA1ScratchRegister -----> U 5 ) PHYCtrlMPA0ScratchRegister ------> . 6 ) PHYCtrlMPA1ScratchRegister ------> U 7 ) LcEobcHeartbeat -----------------> . 8 ) EPMSwitchScratchRegister --------> . 9 ) NPULoopback ---------------------> . RP/0/RSP1/CPU0:ios(admin)# RP/0/RSP1/CPU0:ios(admin)#sh hw-module fpd location all Wed Feb 17 11:09:56.078 UTC ===================================== ========================================== Existing Field Programmable Devices ========================================== HW Current SW Upg/ Location Card Type Version Type Subtype Inst Version Dng? ============ ======================== ======= ==== ======= ==== =========== ==== 0/RSP1/CPU0 A9K-RSP880-LT-TR 1.0 lc cbc 0 50.02 No lc rommon 0 17.36 No lc fpga2 0 0.20 No lc fsbl 0 1.113 No lc lnxfw 0 1.113 No lc fpga3 0 0.05 No lc fpga4 0 0.04 No lc fpga5 0 0.05 No lc fpga6 0 1.11 No -------------------------------------------------------------------------------- 0/FT0/SP ASR-9904-FAN 1.0 ft cbc 7 31.06 No -------------------------------------------------------------------------------- 0/BPID0/SP ASR-9904-BPID2 1.0 bp cbc 11 7.105 No -------------------------------------------------------------------------------- 0/PS0/M0/SP PWR-3KW-AC-V2 1.0 pm fpga11 13 6.04^ No pm fpga12 13 6.02^ No pm fpga13 13 6.02^ No -------------------------------------------------------------------------------- 0/PS0/M1/SP PWR-3KW-AC-V2 1.0 pm fpga11 14 6.04^ No pm fpga12 14 6.02^ No pm fpga13 14 6.02^ No -------------------------------------------------------------------------------- 0/PS0/M2/SP PWR-3KW-AC-V2 1.0 pm fpga11 15 6.04^ No pm fpga12 15 6.02^ No pm fpga13 15 6.02^ No -------------------------------------------------------------------------------- 0/0/CPU0 A9K-MOD200-TR 1.0 lc cbc 0 39.09 No lc rommon 0 8.49 No lc fpga2 0 1.97 No lc fsbl 0 1.103 No lc lnxfw 0 1.103 No lc fpga10 0 1.27 No -------------------------------------------------------------------------------- 0/0/0 A9K-MPA-1X200GE 1.0 spa fpga9 0 1.04 No -------------------------------------------------------------------------------- NOTES: 1. ^ One or more FPD will be intentionally skipped from upgrade using CLI with option "all" or during "Auto fpd". It can be upgraded only using the "admin> upgrade hw-module fpd location " CLI with exact location. RP/0/RSP1/CPU0:ios(admin)# RP/0/RSP1/CPU0:ios(admin)#exit RP/0/RSP1/CPU0:ios# RP/0/RSP1/CPU0:ios#sh controllers np summary all Wed Feb 17 11:09:58.723 UTC Node: 0/0/CPU0: ---------------------------------------------------------------- [total 1 NP] Driver Version 14.46a Build 10 NP 0 : Hardware Revision: v2 A1 : Ucode - Version: 1.0 Build Date: ( Dec 13 2019, 17:51:00 ) : NP core frequency: 575 MHz : DDR frequency : 933 MHz : State: UP RP/0/RSP1/CPU0:ios# RP/0/RSP1/CPU0:ios#sh pfm location all Wed Feb 17 11:09:59.284 UTC node: node0_RSP1_CPU0 --------------------- CURRENT TIME: Feb 17 11:09:59 2021 PFM TOTAL: 0 EMERGENCY/ALERT(E/A): 0 CRITICAL(CR): 0 ERROR(ER): 0 ------------------------------------------------------------------------------------------------- Raised Time |S#|Fault Name |Sev|Proc_ID|Dev/Path Name |Handle --------------------+--+-----------------------------------+---+-------+--------------+---------- Mon Jan 01 00:00:000|--|NONE |NO |0000000|NONE |0x00000000 node: node0_0_CPU0 --------------------- CURRENT TIME: Feb 17 11:09:59 2021 PFM TOTAL: 0 EMERGENCY/ALERT(E/A): 0 CRITICAL(CR): 0 ERROR(ER): 0 ------------------------------------------------------------------------------------------------- Raised Time |S#|Fault Name |Sev|Proc_ID|Dev/Path Name |Handle --------------------+--+-----------------------------------+---+-------+--------------+---------- Mon Jan 01 00:00:000|--|NONE |NO |0000000|NONE |0x00000000 RP/0/RSP1/CPU0:ios# RP/0/RSP1/CPU0:ios#sh controllers np ports all location 0/0/CPU0 Wed Feb 17 11:10:00.743 UTC Node: 0/0/CPU0: ---------------------------------------------------------------- NP Bridge Fia Ports -- ------ --- --------------------------------------------------- 0 -- 0 HundredGigE0/0/0/0/0 - HundredGigE0/0/0/0/1 RP/0/RSP1/CPU0:ios# RP/0/RSP1/CPU0:ios#sh ip int br Wed Feb 17 11:10:01.040 UTC Interface IP-Address Status Protocol Vrf-Name MgmtEth0/RSP1/CPU0/0 unassigned Shutdown Down default PTP0/RSP1/CPU0/0 unassigned Shutdown Down default MgmtEth0/RSP1/CPU0/1 unassigned Shutdown Down default HundredGigE0/0/0/0/0 unassigned Shutdown Down default HundredGigE0/0/0/0/1 unassigned Shutdown Down default RP/0/RSP1/CPU0:ios# RP/0/RSP1/CPU0:ios#sh clock Wed Feb 17 11:10:01.632 UTC 11:10:01.658 UTC Wed Feb 17 2021 RP/0/RSP1/CPU0:ios#
    The configuration aspect of this product is completely upon the buyer. We do NOT configure network module so the buyer must know exactly what they are buying. Items can only be returned if they damaged or not working.
    The Buyer has 7 days to inform seller of any damage or non working equipment
    30 Days Warranty