Night Owl 8.0 4K Hybrid 4 Channel 1TB HDD Surveillance DVR-H2T80B-41-HIK DVR,New

Description

New, never been used. Opened for picture purposes. DVR comes with USB mouse, HDMI cable, power adapter, ethernet cable and quick start guide.
DVR SUPPORTS UP TO 4 4K BULLET CAMERAS AND 2 WIRELESS CAMERAS. NOT INCLUDED.
H2THD80 Series
DVR Models
Image
Update Firmware
(
Instructions
)
Mobile Application
CMS (PC & Mac)
DVR-H2T80B-4
Download DVR4-H2T80B_20181208
Night Owl X and XHD for iOS and Android
Night Owl X Troubleshooting
Night Owl X CMS for PC and Mac
Night Owl X CMS Troubleshooting
DVR Rear View Sync – Press and release to sync the DVR with the wireless cameras. Video Inputs – Allows for the connection of BNC cameras. USB Ports – Allows for the connections of a USB mouse and/or a USB flash drive. You will connect the included USB mouse to assist you in navigating the DVRs menu interface. You will connect a USB flash drive to download video files from the DVR and save them to your USB flash drive. HDMI Output – Allows for the video connection. If the TV/Monitor has an HDMI input, connect the HDMI cable from the HDMI output port on the DVR to the HDMI input port on your TV/Monitor. NOTE: Preferred method. VGA Output – Allows for the video connection. If the TV/Monitor has a VGA input, connect the VGA cable from the VGA output port on the DVR to the VGA input port on your TV/Monitor. (VGA Cable not included) Audio Inputs & Outputs – Allows for the connection of an audio-enabled camera or self-powered microphone and an external speaker to the DVR. (Audio enabled camera, microphone and speaker not included) RJ-45 (Ethernet) Port – Used to connect the DVR to your router/modem via the included Ethernet cable. Power Input – Used to connect the included 12V DC power supply. Power Switch – Use this switch to power ON/OFF the DVR. Make sure the power switch is in the ON position before attempting to use the DVR. Antennas – Connection for the included antennas.
FROM Camera TO Camera Connect the ends of the cable attached to the camera to the ends of a video/power cable labeled TO CAMERA ONLY. 1 NOTE: Audio enabled cameras will have a white RCA connector to transmit audio signal (Optional). Connect the red female power leads of the video/power cables to the male power splitter ends. 3 Power Cable Connectors Power Splitter Connectors NOTE: Power adapters are labeled TO CAMERA ONLY and TO DVR ONLY. NOTE: Check that the UPS or surge protector